Series
Inline & Non-Contact Color Measurement Instruments
CRX non-contact inline spectrophotometers with 45/0 or D/8 geometry, 5–7.5mm standoff, IP66 protection for real-time color monitoring and alerting on coating, film, food and paper lines without touching wet film or soft surfaces.
Models
Models in this series
Compare published models by specification summary, then move into the full parameter table on each model page.
CRX-50/51/52
The CRX-50 uses 45/0 geometry with ~7.5mm non-contact distance for large-format flat materials like paper, textile and film lines. The CRX-51 uses D/8 SCI geometry for industrial coatings, automotive paint and plastic surfaces where specular component matters. The CRX-52 is a multi-angle non-contact sensor for automotive flake pigments, pearlescent paints and effect coatings.
View specifications →
CRX-60
The CRX-60 is a no-screen entry non-contact sensing head with ΔE*ab≤0.1, for embedding into machines as color feedback.
View specifications →
CRX-62
The CRX-62 sits between CRX-60 and CRX-66 with a display, repeatability ΔE*ab≤0.05, for general industrial sorting and QC.
View specifications →
CRX-66
The CRX-66 is a non-contact inline spectrophotometer with 45/0 geometry, 5mm measuring distance, repeatability ΔE*ab≤0.02 and inter-instrument agreement≤0.25. IP66 rated for real-time production-line color QC without touching wet film or soft surfaces.
View specifications →
CS-810
The CS-810 is an inline spectrophotometer with d/8 geometry and SCI/SCE modes. It provides real-time color monitoring and alerts for extrusion, coating, printing and continuous production lines.
View specifications →